Available in 8 pieces set, length bars can be combined upto 2000mm by using M6 stud.
Long series slip gauges and length bars are precision measuring tools used in metrology and precision machining to make highly accurate length measurements and calibrations. These tools are designed to provide extended measurement ranges while maintaining high levels of accuracy and reliability.
Long Series Slip Gauges
- Long Series Slip Gauges are made from high quality steel in cross section 35mm x 9mm with holes for clamping 2 slips together. They are manufactured to DIN-861 of 1988 specifications in different grades. These Are available in the following grades:
- • Calibration (' 0 ')
- • Inspection (' I ')
- • Workshop (' II ')
Length Bars
- Length Bars are made from HCHCR, the gauge faces are hardened to 60-64 RC (800 HV). The bars have a Ø 30mm for Best stability, and ease of handling. Both ends are threaded and recessed, and Precision lapped to meet with the requirements of finish, flatness, parallelism and gauge length. Length Bars are available upto 500mm in the following grades :
- • Calibration (' 0 ')
- • Inspection (' I ')
- • Workshop (' II ')
Technical Specifications
| Measuring Range | 0.5 mm to 180 mm |
| Comprison Range | 0.5 mm to 180 mm |
| Resolution | 0.01 µm |
| Measurement uncertainty | 0.04 µm *under specified conditions |
| Active table surface | 63 mm x 63 mm (Carbide base) |
| Repeatability | + 0.01 µm |
| Dimensions (mm) | 325(L) X 430 (H)X 180 (W) |
| Weight | 40 kg Approx |
| DRO | Mahr C1216 |